manualshive.com logo in svg

Alpine DVI-9990R, Owner'S Manual

Share
Download
Alpine DVI-9990R Owner'S Manual Download Page 69

65

-

EN

4

Press 

2/P.PTY

 to activate the PRIORITY PTY

mode again.
To change the programme category, perform
the step 3.
To disable the PRIORITY PTY function, press
and hold 2/P.PTY for at least 2 seconds.

• In the PRIORITY PTY function, unlike in the T.INFO

function, the volume does not increase during
operation.

5

Press 

F 

•

 SETUP

, the FUNC indicator lights up

red and the mode changes to normal mode.

Displaying Radio Text

Text messages from a radio station can be displayed.

1

Press 

 TITLE

 while receiving FM in the radio mode to select the Radio

Text display.
The display will change every time the button is pressed.

Preset No./Frequency 

→

 PS (Programme Service Name) 

→

 Radio Text 

→

STATION TITLE 

→

 CLOCK 

→

 Preset No./Frequency

The display shows “WAITING” for a few seconds, then starts scrolling the
text message.

• If there is no receivable text message or the unit cannot receive a text message properly, or

there is no programme Service Name data, the display shows “NO TEXT.”

• If you press any one of the multi function buttons 1 to 3 when PS, Station Title etc. is being

displayed, and then press multi function (FREQ.) within 5 seconds, the frequency being
received is displayed for 5 seconds.

The following operation is performed from the main unit.

○○○○○○○○○○○○

○○○○○○○○○○○

130.com.ua

Autogood products internet store  http://130.com.ua

Summary of Contents for DVI-9990R








































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands