116
-
EN
Remote Control Operation
Operating the Navigation (sold separately)
8
p
9
q
4
5
6
2
7
1
w
3
TV MONI.
(Rear of the Remote Control)
1
NAV. transmission indicator
The transmission indicator lights for few
seconds when the mode selector switch is
set to the “NAV.” side.
2
LO.PT. (Local Point) Button
Pressing this button displays the current
position of the vehicle or local interest
points in the vicinity. When this button is
pressed, the selection menu for the
displayed local points will appear in the
display.
3
POS. (Position) Button
Returns to the current position of your
vehicle or displays the latitude/longitude.
When this button is kept pressed, the
screen display changes as follows:
4
ROUTE Button
Pressing this button searches for the route
again and switches between motorway
preference and ordinary road preference
for route searching.
5
DEST. (Destination) Button
Displays street name inputting screen.
6
TEL Button
Displays the telephone number inputting
screen.
7
DEL.DEST. Button
Deletes current destination.
8
OK M.PT (Memory Point) Button
Displays the memory point list.
9
VOICE Button
Initiates vocal instruction for next route
maneuver or repeats last instruction.
p
Button
Switches between two pictures and one
picture.
q
MODE Button
Press this button to input numerals using
the numeric keypad, DEL. and +10 buttons.
After pressing the MODE button, the
following buttons will be pressed while the
status indicator is blinking: numerals (0-9),
DEL. and +10.
w
Mode change switch
Set this switch to the “NAV.” side to operate
a connected Alpine navigation system.
North-up
Heading-up
130.com.ua
Autogood products internet store http://130.com.ua
