Alpine CVA-1003E, Owner'S Manual

Page: 30 / 50

30
-EN
Other Useful Features
Setting the Clock Display
1
When the monitor display is open, press and
hold the
SETUP button for at least 2 seconds.
The SETUP screen appears.
2
Press the Preset 2 button to select GENERAL
setting mode. Press the Preset 2 button again to
select CLOCK DISP.
3
Press the g DN or f UP button to turn off
or on the clock display on the monitor display
respectively.
To set another setting, press the Preset 2 button
or another Preset button.
4
After setting is completed, press the SETUP
button to return to normal mode.
Displaying Time
1
When the monitor display is closed, press the
CLOCK button repeatedly until the clock time is
displayed in the sub display.
NOTES
• Selecting any tuner or CD function while in the clock
priority mode will interrupt the time display
momentarily. The function selected will be displayed
for about 5 seconds before the time returns to the
display.
• The clock time is not shown on both the monitor
display and the sub display simultaneously.
g g
g g
g DN
f f f f f UP
Preset 2
SETUP
TUNE
CLOCK
Turning Sound Guide Function On
or Off
The Sound Guide function will give audible
feedback with a beep sound when a button on the
unit is pressed to acknowledge the receipt of the
signal from the button.
1
When the monitor display is open, press and
hold the
SETUP button for at least 2 seconds.
The SETUP screen appears.
2
Press the Preset 2 button to activate the
GENERAL setting mode. Press the Preset 2
button again to select BEEP.
3
Press the g DN / f UP button to activate/
deactivate the Sound Guide mode. If you turn off
the Sound Guide mode, the sound guide beep
will not be produced when a button on the unit is
pressed.
To set another setting, press the Preset 2 button
or another Preset button.
4
After setting is completed, press the SETUP
button to return to normal mode.
Preset 3