background image

14

-EN

01GB04CDEW203E.fm

ALPINE CDE-W203E 68-14470Z10-A (EN)

Displaying the Text

Text information, such as the disc name and the track name, will be 
displayed if playing a CD text compatible disc. It is also possible to 
display the folder name, the file name and the tag, etc., while playing 
MP3/WMA/AAC files.

Press 

VIEW

.

The display will change every time the button is pressed.

• When the TEXT SCR is set to SCR MANU, press and hold VIEW for 

at least 2 seconds, the current text will be scrolled one time (except 
Radio mode).

The display in Radio mode:

FREQUENCY  

CLOCK  

FREQUENCY

The display in CD mode:

TRACK NO./ELAPSED TIME 

 TRACK NO./CLOCK 

 

TEXT (DISC NAME)

*

1

 

 TEXT (TRACK NAME)

*

1

 

 

TRACK NO./ELAPSED TIME

The display in MP3/WMA/AAC mode:

FILE NO./ELAPSED TIME 

 FOLDER NO./FILE NO. 

 

FILE NO./CLOCK 

 FOLDER NAME

 

 FILE NAME 

 

ARTIST NAME

*

2

  

ALBUM 

NAME

*

2

 

 SONG NAME

*

 

FILE NO./ELAPSED TIME

The display in AUX mode:

AUX NAME 

 AUX NAME/CLOCK 

 AUX NAME

The display in BT AUDIO mode:

The Following display will be shown only when a telephone or 
Bluetooth Streaming device with Metadata capabilities is 
correctly connected with a Bluetooth INTERFACE (Alpine 
KCE-400BT) (sold separately). (For details on Bluetooth 
INTERFACE, refer to the Owner’s manual of KCE-400BT).

BT A

*

3

/ELAPSED TIME 

 BT A/CLOCK 

 ALBUM NAME

*

2

 

 

SONG NAME

*

2

 

 BT A/ELAPSED TIME

*

1

Displayed during playback of a disc with CD text.

*

2

ID3 tag/WMA tag
If an MP3/WMA/AAC file contains ID3 tag/WMA tag information, 
the ID3 tag/WMA tag information is displayed (e.g., song name, 
artist name, and album name). All other tag data is ignored.

*

3

If there is no time sample, “BT A” is displayed as “BT AUDIO”.

 lights up when switching to the TIME display mode.

About the indication display

When displaying Text, the following indicators are lit 
according to the mode.

*

1

Tag information
If there is no tag information, “ARTIST”/“ALBUM”/“SONG” is 
displayed.

*

2

The root folder of disc is displayed as “FOLDER”. The root folder of 
USB memory is displayed as “ROOT”.

*

3

If there is no Text (Disc Name or Track Name), “DISC TEXT”/
“TRACK TEXT” is displayed.

About “Text”

Text:

Text compatible CDs contain text information such as the disc 
name and track name. Such text information is referred to as 
“text.”

• Some characters may not be displayed correctly with this device, 

depending on the character type.

• “NO SUPPORT” is displayed when the desired text information 

cannot be displayed on this unit.

• The text or tag information may not be correctly displayed, 

depending on the contents.

Displaying Time

Press 

VIEW

 repeatedly until the time is displayed.

Each press changes the display.
For details, see “Displaying the Text” (page 14).

• Selecting any tuner or CD function while in the clock priority mode 

will interrupt the time display momentarily. The function selected 
will be displayed for about 5 seconds before the time returns to the 
display.

 lights up when switching to the TIME display mode.

• When the power is off but the ignition key is on, press VIEW to 

display or turn off the time.

Other Functions

VIEW

SOURCE/

Indicator/

Mode

CD Mode

MP3/WMA/AAC/

USB AUDIO 

Mode

iPhone/iPod/

BT AUDIO 

Mode

––

Folder Name

*

2

 

being displayed

––

––

Artist Name

*

1

 

being displayed

Artist Name

*

1

 

being displayed

Text (Disc 
Name

*

3

) being 

displayed

Album Name

*

1

 

being displayed

Album Name

*

1

 

being displayed

Text (Track 
Name

*

3

) being 

displayed

Song Name

*

1

/

File Name being 
displayed

Song Name

*

1

 

being displayed

01GB00CDEW203E.book  Page 14  Monday, November 10, 2008  11:11 AM

Summary of Contents for CDE-W203E































Reviews: