15
-EN
Adjusting Subwoofer Level/Bass Level/
Treble Level/Balance (Between Left and
Right)/Fader (Between Front and Rear)/
Defeat
1
Press
AUDIO
repeatedly to choose the desired mode.
Each press changes the mode as follows:
SubW LEVEL
*1
BASS
*2
TREBLE
*2
BALANCE
FADER
DEFEAT
VOLUME
SubW LEVEL
*1
When the Subwoofer mode is set to OFF, its level cannot be
adjusted, refer to “Turning Subwoofer ON/OFF” on page 16.
*2
Adjustable only when DEFEAT is OFF.
Note
• If no operation is performed for 5 seconds after selecting the Subw
LEVEL, BASS, TREBLE, BALANCE, FADER or DEFEAT mode, the
unit automatically returns to normal mode.
2
Turn the
Rotary encoder
until the desired sound is
obtained in each mode.
By setting DEFEAT ON, previously adjusted level settings of BASS
and TREBLE will return to the factory defaults.
Audio Setup
You can flexibly customize the unit to suit your own preference and
usage. From the AUDIO SETUP menu, Audio Setting can be modified.
1
Press and hold
AUDIO/SETUP
for at least 2 seconds to
activate the SETUP mode.
2
Turn the
Rotary encoder
to select Audio, and then press
ENTER
.
Audio
*1
General
Display
Tuner
iPod&USB
Application
Bluetooth
*2
Audio
*1
Adjustment cannot be performed during a call.
*2
Only for CDE-148EBT.
3
Turn the
Rotary encoder
to select the desired sound
setting menu, and then press
ENTER
.
Factory’s EQ
*3/*4
Parametric EQ
*3/*5
VOL LV ADJ
Subwoofer
Subwoofer Phase
*6
Subwoofer System
*6
Power IC
MX Setup
*3
TCR Parameter
*3
T.Correction
*3
Spatial
*3
X-Over
*3
Factory’s EQ
*3
Adjustment cannot be performed when DEFEAT is set to ON.
*4
Any changes made to either Factory’s EQ or Parametric EQ are
reflected in the others’ settings.
*5
In step 3, nine sound adjustment items can be selected in
Parametric EQ mode. Turn the
Rotary encoder
to select the
desired item, and then press
ENTER
to continue to step 4.
*6
These functions are inoperable when Subwoofer is set to OFF.
4
Turn the
Rotary encoder
to change the setting, and then
press
ENTER
.
5
Press and hold
AUDIO/SETUP
for at least 2 seconds to
return to normal mode.
Notes
• Pressing
r
returns to the previous Sound menu mode.
• If no operation is performed for 60 seconds, Sound menu mode is
cancelled.
10 typical equalizer settings are preset at the factory for a variety of
musical source material. User settings are created in the Parametric EQ
mode.
User
Flat (Initial setting)
Pops
Rock
News
Jazz&Blues
Electrical Dance
Hip Hop&Rap
Easy Listening
Country
Classical
Note
• The Parametric EQ is used to create the Factory’s EQ settings.
You can modify the Equalizer settings to create a response curve more
appealing to your personal taste.
1
After selecting Parametric EQ from the Audio Setup mode,
turn the
Rotary encoder
to select the desired band, then
press
ENTER
.
Sound Setting
Subwoofer Level
0 ~ 15
Bass level
-7 ~ 7
Treble level
-7 ~ 7
Balance
–15(L) ~ 15(R)
Fader
–15(R) ~ 15(F)
Defeat
ON/OFF
Volume
0 ~ 35
/ENTER
AUDIO/SETUP
Rotary encoder
Preset buttons
(1 through 6)
Use steps 1 to 5 to select one of the setting modes to modify.
See the applicable section below for details about the
selected setting item.
Equalizer Presets (Factory’s EQ)
Adjusting the Parametric Equalizer Curve
(Parametric EQ)
00ALPINE.book Page 15 Friday, January 11, 2013 10:01 AM
