22
-EN
Setting the Multicolor Illumination
(CDA-9831 only)
You can change the lighting color of the following four buttons:
SOURCE/POWER, BAND/TEL,
g
and
f
.
1
Press
MENU
to select Illumination.
2
Press
g
or
f
to select your desired color.
BLUE
↔
GREEN
↔
AMBER
↔
RED
↔
(USER'S
*)
↔
BLUE
* You can use your desired colors as shown below if you have
already registered to USER'S.
If you want to use colors other than the above
3
Turn the
Rotary encoder
to select colors (1
through 512).
Each press of
BAND
advances the color number by 30.
1..............19..............184..............363..............512
(Red)
(Amber)
(Green)
(Blue)
To store the setting contents
1) While setting the mode, press and hold any one of the
preset buttons (1 through 6)
for at least 2 seconds.
The setting contents are stored.
To recall the stored color setting
1) While setting the mode, press any one of the
preset
buttons (1 through 6)
.
The stored setting contents are recalled.
4
When the setting has been completed, press
MENU
to select RETURN.
The unit returns to normal mode.
Pressing and holding
MENU
for at least 2 seconds will
return to normal mode.
• "No Memory" is displayed if a preset that has not been stored is
recalled.
Changing the Lighting Color of All the Buttons
(CDA-9831 only)
You can change the lighting color of the unit.
1
Press
MENU
to select Illumination.
2
Press
SOURCE/POWER
.
The lighting color of all the buttons are changed.
AMBER ON
↔
AMBER OFF(green)
3
When the setting has been completed, press
MENU
to select RETURN.
The unit returns to normal mode.
Pressing and holding
MENU
for at least 2 seconds will
return to normal mode.
• SOURCE/POWER, BAND/TEL,
g
and
f
buttons are
changed to that which you have set above in "Setting the Multicolor
Illumination" (this page).
Verifying the Software Version
Current version software can be verified in the display.
1
Press and hold
MENU
for at least 2 seconds.
2
Press
MENU
to select Information (INFO for
CDA-9830).
The version is displayed.
3
Press
MENU
to select RETURN.
The unit returns to normal mode.
Pressing and holding
MENU
for at least 2 seconds will
return to normal mode.
