15
-EN
Equalizer Presets
10 typical equalizer settings are preset at the factory for a variety of
musical source material.
1
Press
MENU
to select Factory's EQ (P-EQ for
CDA-9830).
2
Press either
g
or
f
.
With each press of the button, the equalizer mode will
display the selected equalizer characteristic.
FLAT(OFF)
↔
ROCK
↔
POPS
↔
JAZZ & BLUES (JAZZ)
↔
ELECTRICAL (ELECTRIC)
↔
HIPHOP & RAP (HIPHOP)
↔
EASY LISTEN (EASY)
↔
COUNTRY
↔
CLASSICAL (CLASSIC)
↔
NEWS
↔
USER'S EQ 1,2 (USERS 1,2)
↔
FLAT(OFF)
3
Press
MENU
to select RETURN.
The unit returns to normal mode.
Pressing and holding
MENU
for at least 2 seconds will
return to normal mode.
• This function is inoperable when DEFEAT is set to ON (page 14).
• EQ mode is automatically canceled if no buttons are pressed
within 15 seconds.
• By selecting USER'S EQ 1 or EQ 2 (USERS 1 or USERS 2 for
CDA-9830), you can recall the stored preset number in "Adjusting
and Storing the Equalizer Curve."
Adjusting and Storing the Equalizer Curve
You can modify the Equalizer settings to create a response curve more
appealing to your personal taste.
1
Press and hold
MENU
for at least 2 seconds.
2
Press
MENU
to select USER'S EQ (USERS for
CDA-9830).
3
Press
BAND/TEL.
to select your desired
frequency band.
BAND1
→
BAND2
→
BAND3
→
BAND4
→
BAND1
4
Press
g
or
f
to select your desired
frequency.
Adjustable frequency bands:
BAND1 : 40Hz, 60Hz, 90Hz
BAND2 : 100Hz, 150Hz, 200Hz
BAND3 : 500Hz, 700Hz, 1kHz, 2kHz, 4kHz, 6kHz
BAND4 : 10kHz, 12.5kHz, 15kHz
5
Turn the
Rotary encoder
to adjust the level.
6
Press
SOURCE/POWER
to select your desired
band width (Q).
Adjustable band width:
BAND1 : 1.0, 2.0, 3.0,
BAND2 : 1.0, 1.5, 2.0
BAND3 : 1.0, 2.0, 3.0
BAND4 : 1.0 (fixed band width)
To store the adjusted curve
1) Press and hold, for at least 2 seconds, the
preset
buttons (1 or 2)
into which you wish to store the adjusted
curve.
7
To set another channel, repeat steps 3 to 6.
8
Press the
Rotary encoder
to confirm the
adjusted contents.
The adjusted contents are not stored if the Rotary encoder
is not pressed.
9
After setting, press
MENU
to select RETURN.
The unit returns to normal mode.
Pressing and holding
MENU
for at least 2 seconds will
return to normal mode.
• EQ mode is automatically canceled if no buttons are pressed
within 15 seconds.
• This function is inoperable when DEFEAT is set to ON (page 14).
Recalling the Stored Equalizer Curve
1
Press and hold
MENU
for at least 2 seconds.
2
Press
MENU
to select USER'S EQ (USERS for
CDA-9830).
3
Press either
preset button (1 or 2)
to activate
your desired curve.
4
Press
MENU
to select RETURN.
The unit returns to normal mode.
Pressing and holding
MENU
for at least 2 seconds will
return to normal mode.
• EQ mode is automatically canceled if no operation is performed
within 15 seconds.
• This function is inoperable when DEFEAT is set to ON (page 14).
• You can recall the adjusted equalizer curve from "Equalizer Presets"
(this page).
