Alpine CDA-9811R, Owner'S Manual

Page: 38 / 48

36
-EN
Remote Control
Controls on Remote Control (CDA-9815RB/
CDA-9813R/CDA-9812RX only)
1
Power Button
Press this button to turn the power on/off.
2
Source Button
Press this button to select the audio source.
3
- / J Button
Press this button to switch between the Play and Pause
modes for CD.
4
TILT
98
Buttons
Press this button to adjust the angle of the movable
display.
5
Band/Programme Button
Radio mode: BAND Button
Press this button and the band will change.
CD/Changer mode: To switch the disc mode.
6
Volume Adjustment Buttons
To increase the volume level:
Press the
L
button
To decrease the volume level:
Press the
K
button
7
8 Button
Radio mode: Pressing this button will select, in ascending
order, stations programmed into the radio's presets as
shown below.
1
→
2
...
6
→
1
CD Changer mode: DISC Select (UP) button
Press this button to select a disc in ascending order.
MP3/WMA mode: Press the Folder Select (UP) button to
select the folder.
8
g
DN Button
Radio mode: SEEK (DN) Button
CD mode: Press this button to go back to the beginning of
the current track.
9
f
UP Button
Radio mode: SEEK (UP) button
CD mode: Press this button to advance to the beginning
of the next track.
!
9 Button
Radio mode: Pressing this button will select, in
descending order, stations programmed into the radio's
presets as shown below.
6
→
5
...
1
→
6
CD Changer mode: DISC Select (DN) button
Press this button to select a disc in descending order.
MP3/WMA mode: Press the Folder Select (DN) button to
select the folder.
"
Mute Button
Press this button to lower the volume by 20 dB instantly.
Press this button again to cancel.
#
Audio Processor Button
*
1
CDA-9815RB/CDA-9813R only
Each press the button to switch the audio processor
mode.
For details, refer to “Operating the Audio Processor” as
shown below.
CDA-9815RB/CDA-9813R/CDA-9812RX
Press the button to call the external audio processor
mode when the external audio processor is connected.
*
2
*
1
This button is used for CDA-9812RX in conjunction with an
optional Ai-NET processor.
* 2 For the operation of external audio processor, refer to the Owner's
Manual of the external audio processor you purchased.
Operating the Audio Processor
(CDA-9815RB/CDA-9813R only)
1
Press A.PROC to select the mode.
Normal mode
→
EQ mode (Equalizer Presets)
→
Private mode
(Recalling the Stored Equalizer Curve)
→
Time Correction
mode (Recalling the Stored Time Correction)
→
Crossover
mode (Recalling the Stored Crossover)
→
Normal mode
2
Press 8 or 9 to select the mode.
EQ mode
Select from FLAT, POPS, ROCK and NEWS.
Private mode/Time Correction mode/Crossover mode
Select from MEMORY 1 through 6.
1
2
3
4
#
!
9
"
6
5
7
8