Alpine CDA-7873R, Owner'S Manual

Page: 32 / 44

30
-EN
Changer
Disc Scan
1
Press the "F" button.
The function indicator at the top side of the "F"
button will turn off.
2
Press the SCAN button to play the first 10
seconds of each track on the disc.
The display shows the disc number, "SCAN",
and track number being played during scan play.
Press to the SCAN button to cancel scan play
and resume normal play.
3
Press the "F" button to activate the normal
mode.
The function indicator at the top side of the "F"
button will illuminate.
To Display CD Titles
Titles can be displayed for the CDs with titles
entered.
(Refer to page 24 to title discs.)
1
Press the TITLE button in the CD mode.
The display will be switched each time the switch
is pressed.
CD Changer Operation
Titling Discs
1
Press the TITLE button to select the disc title
display mode. (Refer to page 24.)
2
Make sure that the function indicator at the top
side of the "F" button illuminates, then press the
Preset buttons to select the desired disc to be
titled.
3
Press and hold the TITLE button for at least 3
seconds.
The first digit blinks.
4
Press the MODE button to store the first
character.
The first character will stop blinking and the
display will automatically advance to the next
digit. When that digit begins to blink, you may
choose the next letter or symbol of your title.
5
Repeat the step 4 above to complete the titling.
Entering the eighth character, automatically
stores the title into memory.
When entering a title of less than 8 characters
(for example, 3 character title):
After entering 3 characters to complete your title,
the 4th character space will be blinking. Go to
step 7 to complete the title.
SOURCE
g DN f UP F
TITLE
SCAN
Preset buttons (1 through 6) T.S.M : / J MODE