5
-EN
Display Angle Adjustment
Movable display
The movable display may be adjusted to 3
different angles depending upon user preference.
1
Press the
ANGLE
89
button to adjust the angle
of the movable display.
NOTES
•
The display will close a half minute after the ignition
key is turned to the OFF position.
•
The adjusted angle of the display is stored in memory.
There is no need to re-adjust the angle when the power
is turned back on.
CAUTION
Keep hands (or any other object) away from the display
while it is opening or closing to avoid damage or injury.
The back of the movable display will get very warm
under normal operating conditions. This is not a
malfunction. Do not touch.
Adjusting Volume/Balance
(Between Left and Right)/Fader
(Between Front and Rear)
1
Press the
MODE
button repeatedly to choose the
desired mode.
Each press changes the modes as follows:
NOTES
•
If the MODE button is not pressed within 5 seconds
after selecting the BALANCE or FADER mode, the
unit automatically returns to the VOLUME mode.
•
When the subwoofer mode is ON, its level may also be
adjusted.
•
When the BBE mode is ON, its level may also be
adjusted.
2
Rotate the
Audio Control
knob until the desired
sound is obtained in each mode.
NOTE
Depending on the connected devices, some functions and
display indications do not work.
→
BALANCE
→
FADER
→
VOLUME
Selecting BBE Mode
The BBE (Barcus Berry Electronics) processor
installed in this unit is designed to correct the
phase distortion inherent in most loudspeaker
designs. Ensuring the phase integrity of the signal
driving the speakers improves the accurate
reproduction of the sound.
1
Press and hold the
BBE
button for at least 2
seconds to turn on the BBE mode.
Each press toggles between the BBE on and off
modes.
2
In BBE mode, press the
BBE
knob to select the
BBE adjusting mode.
Each press changes the adjusting mode.
3
To change to a desired BBE level, rotate the
MODE
(Audio Control) knob.
The BBE level can be changed from +1 to +3.
Audio Mute Function
Activating this function will instantly lower the
volume level by 20 dB.
1
Press the
MUTE
button to activate the MUTE
mode. The audio level will decrease by about
20 dB.
Pressing the
MUTE
button again will bring the
audio back to its previous level.
Displaying Time
1
Press the
CLK
(clock) button repeatedly until the
time is displayed.
Each press changes the modes as follows:
Radio mode
CD Player/Changer modes
NOTE
Selecting any tuner or CD function while in the clock
priority mode will interrupt the time display
momentarily. The function selected will be displayed for
about 5 seconds before the time returns to the display.
→
Radio frequency
→
→
TITLE mode
Clock priority
mode
Playing time
mode
→
DISC TEXT
mode
→
→
Clock priority
mode
TRACK
TEXT mode
←
TITLE mode
←
