4
-EN
Basic Operation
POWER
MODE/BBE/
Audio Control
RESET
MUTE
CLK
ANGLE
8
9
Detaching the Front Panel
1
Press and hold the
POWER
button for more than
3 seconds to turn off the power.
2
Press the
(Release) button at upper left side
until the front panel pops out.
3
Grasp the left side of the front panel and pull it
out.
NOTES
•
The front panel may become hot in normal usage
(especially the connector terminals on the back of the
front panel.) This is not a malfunction.
•
To protect the front panel, place it in the supplied
carrying case.
Attaching the Front Panel
1
First, insert the right side of the front panel into
the main unit. Align the groove on the front panel
with the projections on the main unit.
2
Push the left side of the front panel until it locks
firmly into the main unit.
NOTE
Before attaching the front panel, make sure that there is
no dirt or dust on the connector terminals and no foreign
object between the front panel and the main unit.
2
1
1
•
Controllable with Remote Control (CDA-7873
only)
This unit can be controlled with an optional Alpine
remote control. For details, consult your Alpine
dealer.
Point the optional remote control transmitter at
the remote control sensor.
Initial System Start-Up
Immediately after installing or applying power to the
unit, it should be initialized. Press the
RESET
switch
with a ballpoint pen or any other pointed object.
Turning Power On and Off
1
Press the
POWER
button to turn on the unit.
NOTE
The unit can be turned on by pressing any other button
except the eject
c
and CLK/TITLE button.
The volume level gradually increases to the previous
level you were listening to before the unit was turned
off. Press and hold the
POWER
button for at least 3
seconds to turn off the unit.
NOTE
The first time power is turned on, the volume will start
from level 12 and the unit will be in the tuner mode with
BBE on.
Remote control sensor
