Alpine CDA-7865R, Owner'S Manual

Page: 8 / 32

6
-EN
MODE INTLZ
TUNE DN
g f
UP
Basic Operation
Changing Backlighting Colour
1
Press and hold the INTLZ button for at least 2
seconds.
2
Press the
f
UP button repeatedly to select
"AMBER".
Each press of the
f
UP button changes the
modes as shown:
NOTE
If you press the DN
g
button the display scrolls in
reverse sequence.
3
Press the TUNE button to toggle the mode
between AMBER ON (amber) and AMBER OFF
(green).
4
Press and hold the INTLZ button for at least 2
seconds to set the selected mode.
Dimmer Control
Set the DIMMER control to AUTO to decrease the
illumination brightness of the unit with the head
lights of the vehicle ON. This mode is useful if you
feel the unit's backlighting is too bright at night.
1
Press and hold the INTLZ button for at least 2
seconds.
2
Press the
f
UP button repeatedly to select
"DIM".
Each press of the
f
UP button scrolls the
modes as shown:
NOTE
If you press the DN
g
button the display scrolls in
reverse sequence.
3
Press the TUNE button to select the Dimmer mode.
Each press toggles between DIM AUTO and DIM
MANU.
4
Press and hold the INTLZ button for at least 2
seconds to activate the normal mode.
Adjusting Source Signal Level
If the difference in volume level between the CD
player and FM radio is too great, adjust the FM
signal level as follows.
1
Press and hold the INTLZ button for at least 2
seconds.
2
Press the
f
UP button repeatedly to select
"FM-LV."
Each press of the
f
UP button scrolls the
modes as follows:
NOTE
When you press the DN
g
button, the display scrolls
in the reverse sequence.
3
Press the TUNE button to select the FM signal
level mode. Each press toggles between "FM-LV
HI" (High) and "FM-LV LO" (Low).
4
Press and hold the INTLZ button for at least 2
seconds to activate the normal mode.
→
FM-LV
→
REG
→
PTY31
→
AMBER
→
DIM
→
SUB
DEMO
←
AUX
←
SCR
←
MUTE
←
BEEP
←
→
FM-LV
→
REG
→
PTY31
→
AMBER
→
DIM
→
SUB
DEMO
←
AUX
←
SCR
←
MUTE
←
BEEP
←
→
FM-LV
→
REG
→
PTY31
→
AMBER
→
DIM
→
SUB
DEMO
←
AUX
←
SCR
←
MUTE
←
BEEP
←