28
-EN
Change these settings to improve the quality of the outgoing or
incoming call.
Setting item:
Call Sound
Further setting items:
Vol LV Adj / Type Set
Adjusting the volume (VOL LV Adj)
You can emphasize or weaken the volume level of the Phone call, the
ring tone and the microphone input to fit your own preferences.
Setting contents:
Phone Talk:
-5 dB ~ +5 dB
Ring Tone:
-5 dB ~ +5 dB
MIC Gain:
-5 dB ~ +5 dB
Sound Type setting (Type Set)
Depending on your calling environment, choose one of the settings
below which gives the best sound quality.
Setting contents:
TYPE1 (Initial setting) / TYPE2 / TYPE3 / TYPE4 / TYPE5
TYPE1:
Standard Mode (recommended)
TYPE2:
Enhances the noise reduction
TYPE3:
Enhances the echo-cancel
TYPE4:
Enhances both noise reduction and echo-cancel
TYPE5:
Weakens both noise reduction and echo-cancel
Note
• The functions below are designed to improve the sound quality of the
outgoing call.
Noise reduction: This function can reduce the road noise, but excessive
enhancement may affect the sound quality of the call.
Echo-cancel: This function can reduce the echo, but excessive
enhancement may affect the sound quality of the call.
You can choose whether to use these functions according to the
following setting.
Setting item:
Sender ID
Further setting items:
Short Message / Telephone
Setting contents:
OFF / ON (Initial setting)
Setting text message indicator ON/OFF
(Short Message)
When it is set to ON, the
h
indicator blinks for 30 seconds while
receiving a text message. The
h
indicator remains on if there is an
unread text message on the connected mobile phone.
Notes
• Depending on the mobile phone, this function may not be performed.
• The text of the text message will not be displayed on this unit.
• When this unit prompts you of a received text message, it is
recommended to read the message after stopping your car in a safe
place, rather than read it immediately through your phone.
Setting the caller information display ON/OFF
(Telephone)
If you want to keep the ID information of the caller from others, set this
item to OFF. While you are dialing a number, telephone name will be
displayed as “NO Name”. While a call is dialing in or during a call, “NO
Name” will be displayed.
You can set whether to update the phone book automatically.
Setting item:
PB Update
Setting contents:
OFF / ON (Initial setting)
OFF:
The phone book will not update.
ON:
When the mobile phone reconnects with this unit, the phone
book will update.
The BLUETOOTH Menu can be switched within 6 languages.
Setting item:
BT Menu
Setting contents:
English (Initial setting) / Deutsch / Francais / Espanol /
Italiano / Nederlands
The phone book is listed alphabetically by the first letter of First or Last
Name.
Listing by First Name is the default but Last Name can be selected.
Setting item:
PB Order
Setting contents:
First Name (Initial setting) / Last Name
Note
• “Waiting” will be displayed while the Phone book order is switching.
You can quit the “Waiting” screen to perform other operations by
pressing
when the ordering is still in progress. At this time, the
phone book is not accessible. In addition, the ordering may affect the
playback of Bluetooth Audio.
Setting the BLUETOOTH sound quality
Setting the caller information display/
text message indicator ON/OFF
Phone Book Auto Update ON/OFF
Setting the BLUETOOTH Menu language
Changing the Phone book List Order
