Alpina 273050004/A20, Operator'S Manual

Page: 122 / 435

EN - 5
2.4 MAINTENANCE,
STORAGE
Ensure regular maintenance
and correct storage to
maintain machine safety and
high performance levels.
Maintenance
• Never use the machine with
worn or damaged parts.
Faulty or worn-out parts
must always be replaced
and never repaired.
• Cleaning and user
maintenance shall not be made
by children without supervision.
The noise and vibration
levels shown in these
instructions are the maximum
levels for use of the machine.
Suitable preventive measures
must be adopted to eliminate
possible harm caused by high
noise levels and vibration-
induced stresses; utilise the
machine at constant speed,
firmly hold the handgrip with
adequate strength, utilise the
machine at the minimum speed
required to perform the work,
wear ear-protection devices,
make frequent and adequate
pauses during the work.
Storage
• To reduce fire risks, do
not leave containers with
debris inside a room.
2.5 BATTERY / BATTERY
CHARGER
IMPORTANT The following
safety instructions are in addition
to the safety requirements
provided in the specific battery
and battery charger manual
delivered with this machine.
• Only use battery chargers
recommended by the
manufacturer to recharge
batteries. An inadequate
battery charger may cause
electric shock, overheating
or corrosive liquid to
leak from the battery.
• Use only batteries specifically
designed for your power tool.
The use of other batteries may
cause injuries and fire risks.
• Make sure that the machine
is switched off before inserting
the battery. Inserting a
battery in a machine which is
switched on can cause a fire.
• Keep all unused batteries at
a distance from paper clips,
coins, keys, nails, screws
or other small metal objects
as contact with the same
can cause short circuits.
Short circuits between
battery contacts can lead
to explosion or fires.
• Do not use the battery
charger in places where
there are inflammable
vapours, substances or
on easily inflammable
surfaces like paper, fabric,
etc. During recharge, the
battery charger becomes
heated and may cause fire.
• When transporting batteries,
make sure the contacts never
come into contact with each
other and never use metal
containers to transport them.
2.6 ENVIRONMENTAL
PROTECTION
Protecting the environment must
be a significant and top priority