Alphatech Slim Key Board, User Manual, Page: 17 / 21

Parameter Value Description Default
45 c
Time between button presses 2
c - maximal time between press buttons
If time between two next presses is bigger than c time, the code is not
evaluated correctly.
Parameter Value Description Default
46 a Acoustic signalling 1
a - acoustic signalling (evaluation code, sending command to the
SlimDoorPhone...) it is possible switch off
a=0 isn't acoustic signalling, a=1 is acoustic signalling
Parameter Value Description Default
47 l
Optical signalling
1
l - acoustic signalling (evaluation code, sending command to the
SlimDoorPhone...) it is possible switch off
l=0 isn't acoustic signalling, l=1 is acoustic signalling
5.4 Presetting and Deleting
Parameter Value Description Default
51
Delete all access codes (par.1+2)
execute
This choice not change settings for relay and for basic parameters
Parameter Value Description Default
52
Presetting default value (par.3+4)
execute
This choice not change settings access codes
Attention !!! make deletion is non - reversible !!!, then is necessary again
programmed