SlimKeyBoard
– User guide
12
4 Parameter programming
4.1 Programming from buttons on keyboard
4.1.1 Entering programming mode
Change over switch
PROG
to the position "on" cross over keyboard to the
programming mode, sound programming tone and blink LED. After change
over switch back to position "off" programming will finish.
4.1.2 Parameter programming
Initial level for programming is announces by programming tone, to the
hereof state is keyboard returns always after a period of time (6sec) however
are started program anything.
At programming is occur two sorts of parameters. In part are that
parameters
with constant duration
– of those is most, then is programming
confirmed and parameter written into always immediately after fulfilment
obligatory duration
confirmation tone
and partly parameters
with varying
length
(parameter
1 and 2), then
take place
confirmation and write parameter
when after a period of time inactivity (6 sec) or it is possible confirm writing
combination pressing sign keys. Even notice, at these parameters is maximum
longitude 8 digits, after fill those longitude already not waiting and parameter is
written immediately.
If during programming enter number (sign) which is its unused range, so
immediately doorphone transmit
error tone
, parameter don't write down, nor
yet will not change, keyboard cross into initial level and is possible repeat
setting parameter, or program another parameter.
4.2 Install program SlimKeySet
Programme SlimKeySet be determined to OS Windows namely from
version W98SE up to Windows 7. Installer you completion easy installation and
icon of programme show on desktop. Programme SlimProgramSet includes
two programs: SlimDPset and SlimKeySet.
To communication with keyboard is using USB cable and that requires
driver USB. This driver is on CD , or on our WEBu www.alphatech .cz .
Procedure is such, that the to the PC plug in USB cable, PC you invite
to setting path to driveru - care don't let driver install automatically, but by hand
enter path to driveru. Then you must agree with it, that the isn't digitally signed
and installation will pass. In this moment have you got everything prepared on
programming SlimKeyBoard.
Rem cable USB
for programming SlimKeyBoard
is same as
cable for
programming SlimDoorPhone.