Alphatech Slim Key Board, User Manual, Page: 10 / 21

SlimKeyBoard
– User guide
10
3 SlimKeyBoard services
3.1 Signalling overview
Code keyboard acoustic and optical signalling operation. These
signalling can be separately switch off or switch on.
.
Condition Tones LED
Press button
–––■––– –––■–––
Confirm
––██–– ––██––
Error
–■–■–■– –■–■–■–
Programming mode
––▓–▓–––––▓–▓–
-
Connection SlimDoorPhone and
be
missing 12V
–▄–■–▄–■–▄–
-
Programming from PC -
––█––––█––
3.2 Visitor at the door
3.2.1 Separate keyboard
Separate keyboard makes it possible use 10 codes for closure relay and
connect Exit button. To activation relay (opening door) visitor have to know at
least one of 10 input code and before this combination press symbol key.
In SlimKeyBoard it is possible choose for relay one of three modes, first
makes it possible after activation correct code relay switch on to adjusted time
and relay then switch off. Second mode makes it possible switch on two
consecutive impulses, where it is possible set closure time and time between
impulses. Third mode is bistable it means. that one command e.g . switch on
and next command switch off, this state is lasting and every correct evaluation
code negate previous state.
To valid evaluation code must be time between press separate buttons
less than adjusted time (par.45).
3.2.2 Keyboard connection with SlimDoorPhone
Keyboard can connect through SlimDoorPhone
1, 2 or 4 buttons. Expand so possibilities, because
can be from keyboard control how relay in keyboard
(10 codes) so relay in doorphone SlimDoorPhone (10
codes).
Keyboard has two function button
–
symbol key = after pressing is numeric
combination understanding always like