8
3A-2
3A-3
3A-4
Position the wall plate [01]
or [01 and 02] at your
desired height and line up
the holes with your stud
center line. Level the wall
plate and mark the holes.
Drill 4 pilot holes using a
5/32 in. (4mm) diameter
drill bit. Make sure the depth
is not less than 2 23/64 in.
(60mm).
Install the wall plate [01] or
[01 and 02] using lag screws
[A1] and washer [A2]. Tighten
the lag screws [A1] only until
the washers [A2] are pulled
firmly against the wall plate
[01] or [01 and 02].
3/8 in. (10mm)
Socket Wrench
（Not Included）
ø5/32 in. (4mm)
2 23/64 in. (60mm)
01
02
01
02
A1
A2
