background image

2

Tools Needed (Not lncluded)

Supplied Parts and Hardware

5/32 in. (4mm)

Wood Drill

3/8 in. (10mm)

Concrete Drill

3/8 in. (10mm)

Socket Wrench

Phillips 

Screwdriver

Hammer

B

C

Supplied Parts and Hardware for Step 1

Right TV Bracket

Left TV Bracket

x1

03

x1

04

Spacer

L2.5mm

Spacer

L22mm

x4

C3

x8

C1

Spacer

L10mm

x4

C2

Washer

M4/M5

Washer

M6/M8

x4

B1

x4

B2

Note: 

The spacers are shown in 

accordance with the actual size

Stud Finder

Tape Measure

Pencil

Drill

Awl

Level

Verify Your Wall Construction

Solid Concrete

or Concrete Block

CAUTION

DO NOT 

install into 

drywall alone

Wood Studs 

(with Drywall)

If you are not sure the 
wall construction, please 
contact our customer 
service at 
[email protected].

      

Warning:

 This product contains small items that could be a choking hazard if 

swallowed.

Before starting assembly, verify all parts are included and undamaged. Do not use 

damaged or defective parts. lf you require replacement parts, please contact our 

customer service at [email protected].

• 

Please note:

 Not all hardware included in this package will be used.

Summary of Contents for APLT1













Reviews: