Power Pong
User Manual
Page 22
4.4.1
Pre-Configured Drills
The Alpha robot comes with 12 pre-configured drills that can be easily accessed and used for
training. The drills are designed to be used with the throwing head at the 2
nd
ring/height
however individual adjust may be utilized. Following is a listing/description of the drills.
Memory Location
Memory Location
Description
11
Light topspin to backhand
12
12
Light topspin to forehand
13
Light topspin, 1 to backhand and 1 to forehand
14
Light backspin to forehand
15
Light backspin to backhand
16
Light backspin 1 to backhand and 1 to forehand
17
One light backspin to backhand and 1 light topspin to backhand
18
One light backspin to forehand and 1 light topspin to forehand
19
Sidespin serve to forehand and 1 light topspin to backhand
20
Sidespin serve to backhand and 1 light topspin to forehand
21
Sidespin serve to forehand, 1 long backspin and 2 topspin to backhand, 1 topspin to
forehand
22
Sidespin serve to backhand, 1 long backspin and 2 top-spin to forehand, 1 topspin
to backhand
4.4.2
Selecting/Starting a Drill
1.
Select the desired Drill number with the Memory Place rotary dial. Do a
“short”
press (1
second or less) of the Memory Select/save button. This activates the existing drill that is
stored at the memory location
you’ve chosen.
(
Note: A “long” press will result in the drill
currently saved at the chosen position, being overwritten
). The number of balls in the drill
will be indicated by the number of LEDs illuminated above the Ball Placement Rotary dials.
2.
Set the Ball/min rotary dial to a value greater than 0.
3.
Press the Pause button to start the selected drill. The robot will start throwing/cycling
through the balls that are in the drill until you push Pause again to stop.
Figure 4-1
