Power Pong
User Manual
Page 19
3.4.3
Backstep Button (Figure 3-11)
The Backstep button allows you to step (in reverse order), through the balls in the current drill
so that you can modify one or more. To save any changes, you must do a long press of the
MEMORY Select/save button
3.4.4
Sample / Pause Button (Figure 3-11)
Press briefly to start or stop (toggles) ball delivery. While setting up a ball placement, speed,
etc., holding this button down will cause the Alpha robot to throw samples of the current active
ball, until released.
3.4.5
Add Ball Button (Figure 3-12)
Pushing the Add Ball button will add a ball to the current drill (up to six balls). The new ball will
have the settings copied from the previous ball.
3.4.6
Remove Ball Button (Figure 3-12)
Pushing the Remove Ball button will remove the last ball in the current sequence/drill.
3.5
Reset Buttons (Figure 3-12)
The Reset buttons when held down together for approximately 3-5 seconds will reinitialize the
throwing head of the robot.
Figure 3-12
