13
C048-781-30 R01, Rev. B (01/2020)
5.1.1 Firmware Features (Continued)
5.1.1 Firmware Features (Continued)
Table 7. Other Features
OTHER FEATURES
Bus and Module Auto Inventory
- System automatically takes bus and module inventory
Display Brightness Adjustment
- Allows user to change screen brightness
Clear Memory Options
- Clear voltage calibration
- Clear load calibration (bus and breaker)
- Breaker alarm threshold
Test Modes
- Test major alarm
- Breaker isolation test
Raw Data
- Voltage per bus
- Load per breaker
- Temperature status per breaker
Alarms
- Silence buzzer
Configuration
- Powered bus or installed module cannot be removed from configuration
Module Overload and Warning Alarms
- In alarms list, bus and module will be displayed for module in overload
5.1.2
5.1.2 Firmware Icons
Firmware Icons
5.1.2.1
5.1.2.1 Alarm Icons
Alarm Icons
Alarm icons appear when at least one system alarm is present. If this should occur, press the Alarm icon to display alarm
information (refer to Table 8).
y
Major alarm icon appears when there is at least one major alarm.
y
Minor alarm icon appears when there is at least one minor alarm and no major alarms.
Table 8. Alarm Icon Key
ICON
COLOR
STATUS
Red
MAJOR ALARM
- Breaker trip
- Bus overload
- Breaker overload
- Bus over voltage
- Bus under voltage
- Bus redundancy
- Breaker redundancy
- Module overload
- Module communication lost
Orange
MINOR ALARM
- Bus overload warning
- Breaker overload warning
- Bus redundancy warning
- Breaker redundancy warning
- Breaker not inventoried
- Module overload warning
