background image

3

 INTRODUCTION

Thank you for purchasing an Alpha

®

 Air Polisher.  This polisher is the workhorse of 

a complete polishing system.  A wide range of accessories help you perform many 
different tasks.  This tool lets you grind, shape, bevel, contour and polish all kinds 
of granite and marble.  You can easily change from one type of disc to another 
in just a matter of seconds.  The tool is used with water to help you get the best 
possible fi nish, to reduce the health risks of dust, and to give the most savings 
in time and money from modern accessories.  For your safety, please read this 
manual thoroughly before you start operating this polisher. 

 ABOUT THE SYMBOLS

According to the hazard level, all safety notes in this manual are classifi ed into 

DANGER

”,  “

WARNING

”, and “

CAUTION

”.

  DANGER!

 

Death or serious personal injury is imminent when handling 
this polisher incorrectly.

  WARNING!

 

There is a possibility of death or serious personal injury when 

handling this polisher incorrectly. 

  CAUTION!

 

There is a possibility of personal injury or property damage 

when handling this polisher incorrectly.

Note:    In some situations, failing to observe WARNING notes could result in  

death or serious personal injury.  Be sure to read and observe the safety 
notes to ensure safety and correct use of the polisher.  

 SAFETY INSTRUCTIONS FOR POWER TOOLS 

KNOW YOUR POWER TOOL. 

 Read owner’s manual carefully.  Learn its 

applications and limitations as well as specifi c potential hazards particular 
to this tool. 

KEEP WORK AREA CLEAN. 

Cluttered areas and benches invite 

accidents. 

AVOID DANGEROUS ENVIRONMENTS. 

 Keep work areas as dry as 

possible.  Do not use tool in presence of fl ammable liquids or gases.  Keep 
the area well lit. 

1.

2.

3.

Summary of Contents for AIR-658

















Reviews: