10
Choose the desired height according to the application
to be performed and cut along the grooved cut lines to
adjust the height.
Install the rubber splash guard onto the tool so that
the lip on the splash guard fi ts into the groove on
the tool and the cutout is around the water fi tting.
C-SHAPED HANDLE
When used with Alpha
®
Core Bits and Alpha
®
Profi lers, the “C-Shape” handle
allows the operator to have better control and stability during operation. (
Part No.
21A)
.
INSTALLING C-SHAPED HANDLE
2.
3.
Place fl at washer
over hole pattern,
as shown above.
1.
Slide C-Shaped
handle over fl at
washer and align
holes.
2.
Insert bolt and
lock washer into
hole and tighten
by hand.
3.
Using a wrench,
tighten bolts to
securely attached
the C-shaped
handle. Repeat
steps for the
opposite side.
4.
C-shaped Handle during Drilling Application
C-shaped Handle during Profi ling Application
Groove
Water Fitting
