Alpha Unmanned Systems ALPHA 800, Aircraft Maintenance Manual, Page: 85 / 143

COMMERCIAL IN CONFIDENCE
DEV ‐ M ‐ MM A800 V1.7
MAINTENANCE MANUAL
www.AlphaUnmannedSystems.com 84 of 143
SWASHPLATE SETUP
Step 1 – Place the blades pitch measuring tool in the last third
of the blade and adjust the throttle stick to reach 0 degrees.
Step 2 –Roll degrees must be measured with the blades set
to 0º and parallel to the ALPHA 800 heading. Full roll
left/right with the joystick, should be +/ ‐ 6º.
Important: Roll trim must be at center.
Step 3 – Pitch (elevator) degrees must be measured with the
blades set to 0º and perpendicular to the ALPHA 800 heading.
Full pitch up/down with the joystick, should be +/ ‐ 6º.
Important: Elevator trim must be at center.