Alpha Telecom Arion 3100, User Manual

Page: 25 / 130

USB D
RIVER
I
NSTALLATION
2-11
Connect the Power Adapter
Plug the power adapter into the power socket on the side panel of the
ADSL Router, and the other end into a power outlet.
Check the power indicator on the front panel is lit. If the power indicator is
not lit, refer to “Troubleshooting” on page A-1.
In case of a power input failure, the ADSL Router will automatically restart
and begin to operate once the input power is restored.
If the ADSL Router is properly configured, it will take about 30 seconds to
establish a connection with the ADSL service provider after powering up.
During this time the Sync indicator will flash. After the ADSL connection
has been established, the ADSL Sync LED will stay on.
USB Driver Installation
Before you install the software driver, check your system meets the
following requirements:
• An available USB port
• Windows 98/Me/2000/XP (have the Windows installation CD-ROM
ready for use during driver installation)
• A minimum of 1 MB of free disk space for installing the driver and
utility program
The CD-ROM that comes with the package contains all the drivers
available for the ADSL Router.
For installation on Windows 98/Me/2000 see the following pages. For
Windows XP see “Windows XP Driver Installation” on page 2-16.