Alpha Telecom Arion 3100, User Manual

Page: 21 / 130

C
ONNECT THE
S
YSTEM
2-7
Connect the System
The ADSL Router can be positioned at any convenient location in your
office or home. No special wiring or cooling requirements are needed. You
should, however, comply with the following guidelines:
• Keep the ADSL Router away from any heating devices.
• Do not place the ADSL Router in a dusty or wet environment.
You should also remember to turn off the power, remove the power cord
from the outlet, and keep your hands dry when you install the ADSL
Router.
Connect the ADSL Line
Run standard telephone cable from the wall jack providing ADSL service
to the RJ-11 port on your ADSL Router. When inserting an ADSL RJ-11
plug, be sure the tab on the plug clicks into position to ensure that it is
properly seated. If you are using splitterless ADSL service, be sure you add
low-pass filters between the ADSL wall jack and your telephones. (These
filters pass voice signals through but filter data signals out.)