manualshive.com logo in svg

Alpha Technologies Sentra 1000, User Manual

Share
Download
Alpha Technologies Sentra 1000 User Manual Download Page 20

0170000-J0    Rev B

18

For model 3000: To reduce the risk of fire, connect only to a circuit provided with 30 am-

peres maximum branch circuit overcurrent protection in accordance with the National 

Electric Code, ANSI/NFPA 70"

CAUTION!

1

2

3

3.  Installation

3.1  Connect Utility and Load

First, connect the UPS with the utility power, then plug the loads into the outlets on the rear of the UPS. To 

use the UPS as a master on/off switch, make sure that all of the loads are switched on.
The UPS outlets provide battery backup and surge protection for the equipment when the utility voltage is 

out of range.

For models 2200, 1500, 1000 and 750: To reduce the risk of fire, connect only to a circuit 

provided with 20 amperes maximum branch circuit overcurrent protection in accor-

dance with the National Electric Code, ANSI/NFPA 70".

CAUTION!

Do not connect a laser printer to the UPS outlets! The printer may overload the UPS and 

shut it down.

CAUTION!

Summary of Contents for Sentra 1000





































Reviews:

No comments

Brands by name

Popular brands

Load more brands