010-619-J0 Rev B
Page 28
Figure 19:
DC Output Connections
NOTE
:
Make sure the applicable fuse has been removed before unplugging the corresponding
connector.
1. To connect a DC output cable, use needle nose pliers to pull out the appropriate plug-in
connector. Apply gentle clamping force to the pliers to avoid breaking the connector.
2. After the plug-in connector has been removed, attach the cables to the terminal block. Verify the
polarity.
3. Insert the terminal block together with attached cables. Use tie wraps to secure the cables.
Summary of Contents for Cordex HP 48 1.2kW
