- -
8
Connection of "magnetic aerial" (aerial with magnetic foot).
When connecting a "magnetic" aerial to the gate, make sure
that their position is on a larger iron object because this object
creates a counterbalance of the size where the size of the
effective radiated power is dependent above all.
If you have everything ready, connect the gate to the mains.
•
All LEDs on the front panel will flash shortly.
•
The green LED indicating GSM1 module feed will light
up (upper panel).
•
The red LED indicating GSM operation will start flashing
in an interval of 2 seconds, quick flashing of the red
LED (for about 3 seconds) will indicate module logging
in the GSM network (upper panel).
•
The green GSM1 LED on the front panel is flashing.
•
The GSM2 module will also be started within 20
seconds in an identical way.
Operation of GSM1,2 modules (green):
LED is flashing – module logged in the
network, rest condition
LED lit up permanently – connection in
process (call)
Indication of error conditions in channels (red):
LED extinguished – rest condition
LED is flashing – error (more detailed information on
the error can be found out by listing conditions after
depressing the “test” pushbutton in the positioning
routine – see below)