- -
13
program, the file (firm.bgi) with the factory setting will be read
automatically. The file with this name cannot be saved from
the program (in order to prevent in its re -writing). Repeated
reading the file with the factory setting can be performed
anytime using the “factory setting” button.
New access password setting
:
If you wish to modify the access password, it is actually
necessary to log in the program under its former password and
only then to program a new password. That is why a special
field “New password” is included in the program to enter a new
password. Allow the current access code in the password field.
Write the setting in the gate. If transfer is successful, the code
in the field “Password” will be rewritten with the new code from
the “New password” field. If this is not the case, the “New
password” field will be rewritten with the current code from the
“Password” field.
Setting GSM module parameters
Setting the properties of the modules
1 and 2 is identical, it differs only on
indices
.
Priority of
GSM modul 1:
At 1.modul
is one more button for disactivation of
regular channels changing ( when you
dont use LCR). When is not mark the
channels are changing regularly while
making outgoing calls ( to make same
costs on 1 and 2 SIM). When it is
mark then all calls are firstly going to
first channel.
PIN:
set PIN up SIM card in modul. When you use SIM card
without PIN then this window is not used.
MSN (DDI):
is designed for storing automatic dial in – operator
– particularly for each GSM modul (more via. DISA Setting).