Alpha Technologies ALPHA OUTBACK ENERGY Cordex HP LPS36 Compact, Installation Manual

Page: 18 / 32

0300189-J1 Rev B
16
5�3�2 Fan Tray Installation
Fan tray installation should be done before the shelf is mounted to the rack.
1. Assemble the fan holding cradle to the rear bottom of the shelf, secure with two screws.
2. Attach two fan mount brackets to the front, left and right side of the shelf and secure with screws on both
sides.
3. Cut the cable tie holding the fan connector to free the fan wire.
4. Remove the wire grommet from the fan tray and wrap it on fan wire about 1-1/2" from the connector.
5. Slide the back side of the fan tray to the cradle at and angle.
6. Insert the wire grommet back to the slot with fan wire, and then move the fan tray front into position so that the
two thumb screws can be engaged and tightened.
7. Plug the fan connector to the fan tray .
M3 SCREWS,
TORQUE TO 4.5 Kgf-cm [4in-lb]
CUT CABLE TIE TO FREE
CONNECTOR