background image

8

Subject to technical amendments without notice  |  83059700gUK – Translation of the operating manual |  ait-deutschland GmbH

Delivery, storage, transport 
and installation

5.1  Scope of supply

 

Ź

Check  delivery  immediately  after  receipt  for 
externally visible damage and completeness.

 

Ź

Notify supplier of any defects immediately. 

The accompanying parts package contains

 

Ɣ

The  wall-mounted  controller  and  the  outdoor 
sensor as an accompanying package. The box is 
in the free space in front of the condenser.

 

Ɣ

A mailing envelope with 4 anti-slip mats for setting 
down is attached to the outside of the device.

5.2  Storage

 

Ź

Do  not  unpack  the  unit  until  directly  before 
installation if possible. 

 

Ź

Store unit protected against:

 

Ɣ

Moisture/damp

 

Ɣ

Frost

 

Ɣ

Dust and dirt

5.3  Unpacking and transport

Notes on safe transport

The  device  is  heavy  (

Æ

“Technical  data/Scope  of 

supply”  on  page  17).  There  is  a  risk  of  injuries  or 
damage to property if the device falls or overturns.

There is a risk of cutting your hands on sharp edges of 
the device.

 

Ź

Wear cut-resistant protective gloves.

The  hydraulic  connections  are  not  designed  for 
mechanical loads.

 

Ź

Do not lift or transport the device by the hydraulic 
connections. 

Operation and care

  NOTE

The  device  is  operated  via  the  control  panel 
of  the  heating  and  heat  pump  controller 
(

Æ

operating  manual  for  the  heating  and 

heat pump controller).

4.1  Energy and environmentally 

conscious operation

The  generally  accepted  requirements  for  energy 
conscious and environmentally conscious operation of 
a heating system also apply to the use of a heat pump. 
The most important measures include:

 

Ɣ

1RXQQHFHVVDULO\KLJKÀRZWHPSHUDWXUH

 

Ɣ

No  unnecessarily  high  domestic  hot  water 
temperature (note and follow local regulations)

 

Ɣ

Do  not  open  windows  with  gap  /  tilt  open 
(continuous ventilation), but instead open wide for 
a short time (shock ventilation).

 

Ɣ

Always  ensure  that  the  controller  settings  are 
correct.

4.2  Maintenance

Wipe down the outside of the device only using a damp 
cloth  or  cloth  with  mild  cleaning  product  (washing  up 
liquid, neutral cleaning product). Do not use any harsh, 
abrasive, acid or chlorine-based cleaning products.

Summary of Contents for LWP Series





















Reviews: