4
Subject to change without notice | 83059000gUK – Translation of the original operating manual | ait-deutschland GmbH
1.4 Contact
Addresses for purchasing accessories, for service
cases or for answers to questions about the unit and
this operating manual can be found on the internet and
are kept up-to-date:
●
Germany: www.alpha-innotec.de
●
EU: www.alpha-innotec.com
2 Safety
Only use the unit if it is in proper technical condition
and only use it as intended, safely and aware of the
hazards, and follow this operating manual.
2.1 Intended use
The unit is solely intended for the following functions:
●
Heating
●
Domestic hot water preparation (optional, with
accessories)
● Cooling, reversible to 18°C flow temperature
►
Proper use includes complying with the operating
conditions (
“Technical data / Scope of supply”,
page 23) and the operating manual and noting
and following the reference documents.
►
When using the local regulations note: laws,
standards, guidelines, directives.
All other uses of the unit are not as intended.
2.2
Personnel qualifications
The operating manuals supplied with the product are
intended for all users of the product.
The operation of the product via the heating and he-
at pump control and work on the product which is in-
tended for end customers / operators is suitable for all
age groups of persons who are able to understand the
activities and the resulting consequences and can car-
ry out the necessary activities.
Children and adults who are not experienced in hand-
ling the product and do not understand the necessa-
ry activities and the resulting consequences must be
instructed and, if necessary, supervised by persons
experienced in handling the product and who are re-
sponsible for safety.
Children must not play with the product.
The product may only be opened by qualified personnel.
All instructional information in this operating manual is
solely directed at qualified, skilled personnel.
Only qualified, skilled personnel is able to carry out
the work on the unit safety and correctly. Interference
by unqualified personnel can cause life-threatening
injuries and damage to property.
►
Ensure that the personnel is familiar with the local
regulations, especially those on safe and hazard-
aware working.
► Allow qualified personnel with “electrical” training
only to carry out work on the electrics and
electronics.
► Allow qualified, skilled personnel only to do any
other work on the system, e.g.
●
Heating installer
●
Plumbing installer
●
Refrigeration system installer (maintenance
work)
During the warranty and guarantee period, service
work and repairs may only be carried out by personnel
authorised by the manufacturer.
2.3 Personal protective equipment
There is a risk of cutting your hands on sharp edges
of the unit.
►
Wear cut-resistant protective gloves during
transport.
2.4 Residual risks
Electric shock
Components in the unit are live with life-threatening
voltage. Before opening the unit panelling:
►
Disconnect unit from power supply.
►
Protect unit against being switched back on again.
►
Residual voltage at the inverter. Wait 90 seconds
before opening the device.
Existing earthing connections within housings or on
mounting plates must not be altered. If this should ne-
vertheless be necessary in the course of repair or as-
sembly work:
►
Restore earthing connections to their original con-
dition after completion of the work.
Injury due to moving parts
►
Switch device on only with air ducts and weather
and/or rain louvres fitted.
