Alpha-InnoTec LW 161H-A, Operating Manual

Page: 8 / 40

8
Subject to change without notice | 83061500bUK | ait-deutschland GmbH
15 Scope of supply
Example of scope of supply packaging:
Packing unit 1:
Air deflector hoods (2 hoods, each in a
separate box)
Packing unit 2:
Compact unit with hermetic compressor, all
safety-relevant components for monitoring
of the cooling circuit and hose for
condensate discharge (connected on the
heat pump side).
1 Extra box:
Circulation pump UPM GEO 25-85 180
PWM
Load compressor plug for connection
to wall-mounted controller
Bus line plug (communication) for
connection to wall-mounted controller
Return flow sensor with cable ties and
thermal compound
1. Check the delivery for outwardly visible signs of
damage.
2. Check to make sure that the delivery is complete.
Any defects or incorrect deliveries must be
reported immediately.
NOTE
Note the unit model.

“Technical data/Scope of supply”, page 26
Functionally necessary accessories
IMPORTANT
Use only original accessories made by the
manufacturer of the unit.
The heating and heat pump controller as a wall-
mounted controller is a functionally necessary
accessory.
The heat pump is only a fully functional unit if the
heating and heat pump controller is installed.
Heating and heat pump controller 2.1-16kW
(for wall mounting)
Communication between the heat pump and controller
takes place via a cable to be laid on site by the
customer (I(Y) STY 2x2, ø each ≥ 0,6 mm²).
Additional accessories
You must order separately:
● installation accessories (vibration decouplers)
for air/water indoor installation heat pumps
● air / magnetic sludge separator