Alpha-InnoTec LW 161H-A, Operating Manual

Page: 12 / 40

12
Subject to change without notice | 83061500bUK | ait-deutschland GmbH
2. Removing the upper facing panels from the unit.
2.1. To do this, undo the two screws at the bottom
edges of each of the upper facing panels.
2.2. Pull each of the facing panels downwards and
outwards, lift them out of the unit cover at the top
and put in a safe place.
1 Unit cover
2 Upper facing panels
3. The unit cover has been fixed by the upper facing
panels. After removing the upper facing panels,
the top cover sits loosely on the top. Lift off the
unit cover and put it down in a safe place.
4. Installing the air deflector hoods.
IMPORTANT
Before starting the installation, remove the
protective film from the air deflector hoods.
4.1. Hook the air deflector hoods onto the brass bush-
ings at the top of the unit frame.
1 Eye in the air deflector hood
2 Brass bushing on the unit frame
4.2. Screw the air deflector hoods onto the unit frame
on the switch box side (= operating side) and the
water connection side.