12
Subject to change without notice | 83051400cUK – Translation into English of the original German operating manual | ait-deutschland GmbH
PREPARING FOR INSTALLATION
Remove lower facing panels on the switch cabinet
side (= operator side) and the water connection
side of the unit:
1 Quick-release screws
2 Lower facing panel
Loosen quick-release screws. Turn counter-clock-
wise 90°...
On both sides, pull lower facing panel upward and
outward, detach and set securely aside.
LIFTING THE UNIT WITH PIPES
(ONLY LW 90A/RX…)
The units can be lifted with ¾” pipes (provided by
customer) that are suitable for the weight of the
respective unit. Special holes are provided in the frame
for this purpose.
Insert the pipes through the holes in the frame on
the switch cabinet side (= operator side) ...
Make sure that pipes do not damage cable
assemblies and components in the unit.
Guide pipes carefully past cable assemblies and
components in the unit...
Insert the pipes through the holes in the frame on
the water connection side...
