13
Subject to change without notice | 83051400cUK – Translation into English of the original German operating manual | ait-deutschland GmbH
Lift unit by the pipes, with at least four persons, and
place on the base. Make sure that the frame of the
unit is in full contact with the underlying surface...
LIFTING THE UNIT WITH A CRANE
NOTICE.
Models LW 140A/RX and higher must be lifted
using a crane.
Remove side laths on the wooden pallet...
Guide lifting straps under the unit. Insert laths or
beams between the lifting straps and the unit in or-
der to prevent damage to the housing, or remove
facing panels...
See removal instructions under “Attaching air
flow baffles”.
A Front view (operator side)
B Side view 1
DANGER!
Lifting straps should not be too close to‑
gether or too near the centre; otherwise
the unit may tip!
C Side view 2
ATTENTION
Guide lifting straps past the fan on the
side. Make sure the straps do not press
against the ventilator during transport.
Lift unit with the crane and place on the base. Make
sure that the frame of the unit is in full contact with
base.
ATTACHING THE AIR FLOW BAFFLES
WARNING!
Unit has rotating parts.
For safety reasons, mount the two air flow
baffles on the unit before continuing with
any other work.
