Alpha Group OutBack Power MATE3, Owner'S Manual

Page: 114 / 160

Battery Monitor Settings
112
900-0117-01-00 Rev A
MATE Settings
MATE Settings Menus include::

Advanced Generator Start : --------------------- >
See page 114.
1.
Setup -------------------------------------------- > See page 115.
2.
Voltage Start ---------------------------------- >
See page 118.
3.
Load Start -------------------------------------- > See page 119.
4.
State-of-Charge Start ---------------------- >
See page 120.
5.
Must Run Schedule -------------------------- >
See page 121.
6.
Quiet Time Schedule ------------------------ > See page 122.
7.
Generator Exercise Schedule ------------- >
See page 123.
8.
Set Total Generator Run Time ----------- > See page 124.
9.
Display AGS Timers -------------------------- >
See page 125.

Data Logging ---------------------------------------- >
See page 126.

High Battery Transfer ----------------------------- > See page 127.

Grid Use Time ---------------------------------------- >
See page 129.

Charge Controller Float Coordination ------- > See page 131.

FLEXnet DC Advanced Control
----------------- > See page 132.

Reset to Factory Defaults ------------------------ > See page 133.
To access the
MATE Settings
Menu Option:
1. From the Main Menu , access the Settings Menu (see Figure 56).
2. Use the control wheel to scroll down to the MATE Menu.
3. Press the button in the center of the control wheel to accept the selection.
Figure 112 Accessing the MATE Settings Menu
1 2 3