MATE3 Settings
900-0117-01-00 Rev A
123
AGS Generator Exercise Schedule
Exercise is a time period when the generator is scheduled to run briefly, regardless of system conditions.
IMPORTANT:
Regularly running a generator keeps engine components lubricated, expels excess
moisture, charges the starting battery, and helps prevent carbon build-up. Consult
the generator owner’s manual for the appropriate length and frequency of exercise
periods and what load to run during the exercise period.
To enable the AGS to start the generator based on the
Generator Exercise Schedule
screen:
1.
Access the
MATE
menu as shown in Figure 113.
2.
Use the control wheel to select the
Advanced Generator Start
menu option.
Press the button in the center of the control wheel to accept the selection.
3.
Use the control wheel to highlight
Generator Exercise Schedule
screen.
Press the button in the center of the control wheel to select the menu item.
4.
Use the control wheel to select
N
for No (disabled) or
Y
for Yes (enabled).
Press the button in the center of the control wheel to select the menu item.
5.
Use the control wheel to increase or decrease the
Start
Time
.
Press the button in the center of the control wheel to select the set point.
6.
Use the control wheel to increase or decrease the
Run Period
.
Press the button in the center of the control wheel to select the set point.
7.
Use the control wheel to increase or decrease the
Exercise Interval
.
Press the button in the center of the control wheel to select the set point.
8.
Use the control wheel to select N (No) or Y (Yes) to
Disable Sell During Exercise
.
Press the button in the center of the control wheel to select the set point.
9.
Press the
TOP
navigation key to return to the
Main Menu
screen.
Figure 122 MATE/AGS/Generator Exercise Schedule Screen
Set points:
Enable
:
N
= No,
Y
= Yes
Exercise Run on
Sun (Mon – Sun)
Start Time
0:00
to 23:59
Run Period
1 to 240 minutes
Exercise Interval
0 to 8 weeks
Disable Sell During Exercise
N
= No,
Y
= Yes
Summary of Contents for OutBack Power MATE3
