7
3. The ‘PRISMA-S’ siren can be placed in any convenient location; for example, on a bookshelf
or hung on a wall.
The maximum operating distance for the siren and alarm devices is up to 100 meters in an open
space.
VERIFICATION
1. Pick up the keychain remote control and press the ‘A’ button.
2. Wait for the light diode on the keychain remote control to flash red, the <<ZONE>> light diode
will flash green and an intermittent beep will sound. The arming delay countdown will begin (default setting
is 40 seconds). At the conclusion of the countdown, the Socket enters the armed alarm mode. The light
diode on the siren flashes once and a short beep is emitted*. During this duration of time, it is necessary to
vacate the protected zone. Simply exit to the neighboring adjacent room.
3. Wait to receive an SMS notification containing the text ‘Armed via keychain remote control
No.#**’.
4. Wait for 10 seconds, then enter the protected zone.
5. The siren will start emitting sound and light signals after the expiration of the time delay
(default setting is 20 seconds, if selected).
6. Wait to receive an SMS notification containing the text ‘Alarm Device No.#**’ and an
incoming call from the Socket.
* While the siren body is open, jumper J2 found on the circuit board can be removed in order to activate
audio sound confirmation of Armed/ Disarmed modes.
** # is the sequential number of the keychain remote control.
