1. Remove the cover on the bottle, and fit the adaptor into the bottle mouth.
a) Please use 9. adaptor for 0.33 to 2 L
bottles. For fitting, align the adaptor center to the bottle mouth, and force it into the mouth, until an
even “click” is heard.
b) Please use 10. adaptor for 5L bottles. For fitting, align the adaptor center to the bottle mouth, and tight-
ly turn the adaptor onto the bottle mouth.
2. Load the bottle fit with adaptor onto the top cup of the water dispenser as shown.
3.
Press the hot water key (please
refer to the instruction below for this operation) and cold water key until water is flowing out homoge-
neously from respective taps.
4. Plug the water dispenser into power outlet.
5. Switch on the water dispenser (13-14).
U S E O F H O T W
U S E O F H O T W
A
A
T E R
T E R
Safe tab
There is a safe tab on the hot water key of the water dispenser, to prevent possible scalding accident with
children resulted from improper operation (please refer to “Caution”).
For getting water from the hot water tap, first press the red safe tab on the key towards the water dispenser
horizontally, and at the same time press the hot water key until water flows out from the tap.
Use instructions
As the firing of the water is extremely fast, we advice you to switch off the hot water switch (13) as soon as
you finish to help yourself.
Moreover, this will allow you to economize on energy.
12
Bottle fit with adaptor
is mounted on the
water dispenser.
Drain plug
Notice Fontaines 3/07/06 15:53 Page 12
