ALPATEC F 500 CT, User Manual

Page: 11 / 16

Specific components
Model F 500 FC F 500 FT F 500 CT
Part No. Hot and Cool Cool & Normal Hot & Normal
11. Red Indicator Heating is in progress Indicates power ON Heating is in progress
when it is ON. when it is ON.
12. Double colour Cooling is in progress Cooling is in progress ---
Indicator - RED when it is ON. When it is ON
12. Double colour the set temperature is the set temperature is the set temperature is
Indicator - GREEN reached when it is ON reached when it is ON reached when it is ON
13. White switch Heating power switch --- Heating power switch
14. Black switch Cooling power switch Cooling power switch ---
NOTE : To use hot water function and cool water function, press 0/I button on the back side of appliance (13
and/or 14) when the button is on “I” or “marche” position, the appliance is switch on. When the button is on
“0”, the appliance is switch off.
The words ‘froid” and “chaud” are only indication.
Features/model F 500 FC F 500 FT F 500 CT
Hot and cool Cool and normal Hot and normal
Hot water tank capacity and first 420 ml . 10 min --- 800 ml . 10 min
time to warm up (88°C)
Icy water tank capacity and first 350 ml . 40 min 700 ml . 40 min ---
time to cool (<12°C)
Normal water --- Direct flowing Direct flowing
L O A D I N G T H E D I S P E N S E R
L O A D I N G T H E D I S P E N S E R
• Make sure the dispenser is unplugged with both the hot and cold power switched off.
• Wash hands and wipe the adaptor and the top of the bottle with a clean cloth.
• Avoid touching the part of the bottle and adaptor that will be in contact with the water dispenser.
• Make sure the water level in the top of the dispenser is low enough to allow for proper bottle installation.
Failure to do so may cause the dispenser to overflow.
• Please refer to “care and cleaning of the dispenser” for using the water dispenser for the first time or after
its maintenance.
11
Notice Fontaines 3/07/06 15:53 Page 11