Cleaning the Filter
1. Unplug the unit.
2. For MERV-1 Filter:
a. Remove prefilter from inlet of machine.
b. Vacuum or wash with warm water (no soap).
3. For MERV-10/ Filters:
a. Replace as necessary- we recommend
checking the filters
at least 1x/year
Electrical Access
•
Unscrew the 13 screws on the side panel.
•
Remove the 2 screws on the
control board cover.
Pump Maintenance
Your AlorAir Sentinel HDi120 is equipped with an integral condensate pump designed to pump water
from the dehumidifier out to the desired drain.
The pump requires routine maintenance that is not covered by the warranty.
Preventative maintenance is necessary to prevent issues from dirt and slime that may
accumulate in the drain system. This includes the drain pan, hose to the condensate pump,
pump reservoir, pump head assembly, and discharge tubing.
Coil Maintenance
•
Once per year, clean the coils with an approved coil cleaner. The
coil cleaner should be a self-rinsing, foaming, cleaner, such as
WEB® Coil Cleaner.
**
For more detailed instructions, visit www.alorair.com**
WARNING: Always unplug the unit before doing any maintenance.
Cleaning the Machine Body
•
Use a soft, damp cloth to clean the exterior of unit. Do not use any
soap or solvents
Maintenance
9
Summary of Contents for Sentinel HDi120
Page 14: ...MERV 1 filter AlorAir MERV 10 filter...
Page 15: ...Limited Warranty Exclusions...
