TROUBLESHOOTING
PANEL DISPLAY
FAULT
REASONS
SOLUTIONS
Verify that both ends of the
Power cord are plugged in.
Power Supply.
Display is
blank
Filter is Dirty.
Fan failure
pop-up window.
Hi
Check to make sure the remote
control cable is connected at
both ends, and contact customer
service if there is no problem.
Remote control probe
failure small pop-up window.
Ma2
Rt1
Power Outage.
Reset power.
Thermal alarm code
pop-up window.
Small pop-up window
for air inlet probe failure.
Check to make sure the sensor
cable is connected at both ends.
If no problem is visible, the sensor
may be wrong.
Rt2
Clear the blockage.
AIR Inlet or Outlet is Blocked.
Electric Heat Drying System
13
