The following inspections must be made on the filters:
• check that the internal mesh of the pre-filter is compact and that no wires protrude from the containing
meshes.
• check that the frame is not deformed or damaged.
If the pre-filter is badly damaged, replace it with a new one.
6.3 Cleaning the device
To clean the outside, use a cloth sprayed. Use a brush with soft bristles to clean the air outlet fins. To clean
the inlet grill, use a vacuum cleaner with a dusting attachment.
7. Basic system
Basic system
The System carries out the controls and gives the commands for filtration and the power supply for tha negative
ionisation module (if provided) along with the information required on the operating status of the apparatus.
Negative ionisation
The BASIC SYSTEM allows a continually, negative environmental ionisation.
7.1 Power supply and anti block-out system
The device is powered by a mains voltage of 210 to 240V AC at 50/60 Hz.
ATTENTION:
always connect the apparatus to the earth to protect persons, things and animals and
respect CEI 11-29, CEI 64-8, and EN 60335 standards.
7.2 Signals
The electronic control of this apparatus provides the user visually with all the information on operation
required for correct use, and makes available the means for fast checking to seek any small anomalies.
c
ALNOR
®
ventilation systems
is a legally protected trademark and technical patent. All rights reserved.
28
w
w
w
.al
nor
.c
om.
pl
User’s manual
e-MOCarz
