8
29. Attach VENT COVER
Screw the Vent Cover
over the vents on Wall
Section B using the pre
-
drilled hole.
NOTE:
Tighten only
enough so vent cover will
turn freely over vents.
26. Mount POWER SUPPLY
Use provided screws to posi-
tion Power Supply where it is
most convenient for you on
the outside of Wall Section C.
Optional: Secure excess wire
with zip tie or some other fas-
tener as desired.
27. Connect to
POWER SUPPLY
Plug the Cord
into the Power
Supply. Plug the
Power Supply
into any wall
outlet, and flip
the switch
mounted on the
back of the
bench to oper-
ate the LED
light.
Cord from LED light
Power
Supply
28. Attach SHORT
BACK REST
Install Short Back
Rest at desired
height above Lower
Bench. Use 2”
screws and pre
-
drilled holes to
attach to Wall
Section I.
25. Attach LONG
BACK REST
Use 2” screws and pre
-
drilled holes to
attach the Long Back
Rest to Wall Sections
B and C.
24. Drill Hole for LIGHT CORD
The LED lighting comes installed
on the back of the Back Rest. Find
the cord coming from the light
switch and drill a small hole in
Wall Section C to insert the Light
Cord through so it comes through
to the outside of the sauna.