9
The almando Masterplay is available in two versions with different outputs:
Version 1
with the classic Masterlink socket is
suitable if you have a finished Masterlink cable
with Masterlink connectors at both ends.
Version 2
with a screw terminal is suitable if
you have a Masterlink cable with only one
Masterlink connector and one open end on the
other side (e.g. a cable removed from a
junction box).
Here you simply insulate the individual wires
at the open end of the cable, approximately
4 - 5 cm and connect them to the screw
terminal with a small screwdriver. The colour
coding is printed directly on the screw
terminal. The three bare wires without
coloured plastic insulation are twisted and
connected to GND.
Summary of Contents for Masterplay
Page 15: ...15...