Allworx 9202E, User Manual

Page: 29 / 46

Allworx Phone Model 9202E User Guide
+1 866 ALLWORX * +1 585 421 3850 Page 21
www.allworx.com
Version J Updated: February 14, 2019
2 Listen to saved voicemail messages. See “To manage voicemail messages:” on page 22 for more
options.
3 Send a message.
• Enter the extension or alias to forward the message. The Allworx system plays the selected user’s
number and name, and then prompts for another extension.
• Select one of the options:
• Record a message, and then press the # key when complete.
• Select one of the following options:
4 Change your Message Center system settings. See “To update the Audio Message Center settings:” on
page 23 for more options.
7 Access an outside line (if enabled).
Dial the external phone number directly. It is NOT necessary to dial 9 or 78+PIN before the phone
number.
After connecting to an external call and the external party hangs up, users hear a dial tone to place
additional calls. Additional options include:
9 To manage system recordings (requires Recording Manager permissions). See “To manage the Call
Queues/ACD Queues recordings and schedules:” on page 25 for more options.
hang
up
End the call.
# Return to the previous menu.
* Replay the menu options.
Key Option
• Outgoing message is playing The Allworx system places the call immediately.
• During or after leaving a
message
The Allworx system delivers the message, and then
transfers the caller to the dialed extension.
Key Option Key Option
1 or hang up Send the message # Cancel the message
2 Review the message * Hear these options again
3 Change the message
Key Option
*# Disconnects (hangs up) the call and returns to the dial tone.
*# <Allworx PIN> # Returns to the Audio Message Center from the dial tone.
NOTE: The ability to hang up a call and return to a dial tone using *# is not available for
certain combinations of originating phones and outside lines. Contact the Allworx
administrator for more information.