Allworx Phone Model 9202E User Guide
+1 866 ALLWORX * +1 585 421 3850
Page 5
www.allworx.com
Version J Updated: February 14, 2019
2.
Press the volume bar – (decrease) or + (increase) to adjust the incoming ring audio level. The
phone plays the audio tone.
To adjust all other volumes:
1.
Pick up the handset or turn on the speaker phone or headset. Locate the phone volume bar. The
phone screen displays which audio path is being adjusted.
2.
Press the volume bar to – (decrease) or + (increase) the audio level.
2.4 Wall Mounting (Optional)
2.4.1
Wall Mounting Plate
Mounting the Allworx phone on a wall requires a mounting plate that meets the TIA-570-B standard
and is available from a local telephone company or local retailer. The mounting plate has studs that
position the Allworx phone flush to the wall surface.
Remove the Allworx phone base and mount the phone over the mounting plate studs. All power and
RJ-45 cable connections should exit between the phone back and the wall, and then routed to the
network connection and/or a power connection.
2.4.2
Handset Retainer Clip
The handset retainer clip prevents the handset from slipping out of the phone cradle while hanging on
a wall.The Allworx phone ships with the adjustable handset retainer clip in the wall mount position on
the phone cradle.
Caution:
If using a standard telephone wall mount plate, DO NOT connect to the RJ-11 jack. This
connection is for analog phones and may cause damage to the Allworx phone, which
voids the warranty.
Leviton 4108W-0SP
